Native Union Honeycomb - Manual (Page 19)

Which phone is the primary phone?
The primary phone is either the phone that connected to the MM04i most recently or the
phone that had the last active call:
• When your phones connect to the MM04i, the one that connects last becomes
the primary.
• Every time you have an active call through the MM04i (incoming or outgoing),
the phone with the call becomes the primary phone.
• If both phones go out of range and come back into range together then the primary
phone will be whichever one happens to reconnect last out of the two. In this case you
will not be able to tell which phone is the primary until you either initiate a call through
the MM04i or receive a call on one of the phones.
Setting the Primary Phone
You can force the MM04i to change the primary phone by doing any of the following:
• Answer an incoming call : the phone receiving the call will become the primary phone.
• Initiate a call from one of the phone : the phone making the call will become the primary phone.
Multiple Calls in a multipoint connection scenario
The MM04i does not allow you to call from 2 phones simultaneously. If you receive a call
from Bluetooth device 2 while you are already on an ongoing call on Bluetooth device 1,
you will hear a special ringtone in the MM04i :
18