General specifications, General safety precautions – Nexen MBU-1125 937300 User Manual
Page 4
4
FORM NO. L-21087-C-1010
GENERAL SPECIFICATIONS
Specifications
Torque:
Clutch: Up to 130 Nm (1150 in-lbs)
Brake: Up to 175 Nm (1550 in-lbs)
Actuation Pressure:
1 - 5.5 bar (14.5 - 80 psi)
Service Temperature:
4.5 - 104 C (40 - 220 F)
Approximate Weight:
Up to 43 kg (95 lbs)
GENERAL SAFETY PRECAUTIONS
CAUTION
Some product assemblies can exceed
90 lbs. Use lifting aids and proper lifting
techniques when installing, removing, or
placing in service.
CAUTION
This product has pinch points between
the driving and driven elements of the
torque interface. Keep hands clear.
CAUTION
These products have exposed shafts
and/or driving components. Keep
hands and clothing clear.
WARNING
This product is capable of emitting a
spark if misused. Therefore it is not
recommended for use in any explosive
environment.
CAUTION
Watch for sharp features when
installing and servicing this product.
The parts have complex shapes and
machined edges.
CAUTION
The temperature limits for this
product line are 4.5-104 Degree
Celsius (40-220 Degree F).
CAUTION
This product has pinch points
between the driving and driven
elements of the torque interface.
Keep hands clear.
CAUTION
These products have exposed shafts
and/or driving components. Keep
hands and clothing clear.
WARNING
Ensure proper guarding of the product is
used. Nexen recommends the machine
builder design guarding in compliance
with OSHA 29 CFR 1910 “Occupational
Safety and Health Hazards”.