Citizen Systems iDP3240 - Manual (Page 107)

— 87 —
ESC a n
[Function] Aligning the characters
[Code] <1B>H<61>H<n>
[Range] 0 n 2
48 n 50
[Outline] All the printed data within one line are aligned in the specified
position.
• Depending on the value “n”, positional alignment is carried
out as shown in the table below:
n Position
0,48 Left end alignment
1,49 Centering
2,50 Right end alignment
[Caution] • This command is valid only when it is inputted at the beginning
of a line.
• The settings of this command have no effect on PAGE MODE,
but items set in PAGE MODE are valid even after STANDARD
MODE resumes.
[Default] n = 0
[Sample Program]
[Print Results]
Paper Feed
Direction
Left-justified Centered Right-justified
↑
 A A A A A
A A A A A
A A A A A
LPRINT CHR$(&H1B) + “a” + CHR$(0);
LPRINT “AAAAA” + CHR$(&HA);
LPRINT CHR$(&H1B) + “a” + CHR$(1);
LPRINT “AAAAA” + CHR$(&HA);
LPRINT CHR$(&H1B) + “a” + CHR$(2);
LPRINT “AAAAA” + CHR$(&HA);
END