COBY electronic CS-MP125 - Manual (Page 16)

Page 16 Coby Electronics Corporation
Set when the alarm timer will sound:
Press once; the current alarm time will be displayed
with the “hour” digit flashing.
Press again; the “minute” digits will start flashing.
Rotate the TUNING/SET dial to adjust the minute value.
Press once more to finish setting the alarm timer.
The iPod alarm mode will not be available if a compatible iPod
is not connected to the iPod dock.
If you are waking to the radio, make sure to tune to the desired
station prior to setting the alarm.
Alarm Timer Activation
Press to change which alarm timers are active.
To activate Alarm 1, press until 1 appears at the bottom of the
LCD Display.
To activate Alarm 2, press until 2 appears at the bottom of the
LCD Display.
To activate both Alarm 1 and Alarm 2, press until 1 and 2 both
appear at the bottom of the LCD Display.
After the alarms have been activated, turn off the player. The
alarms cannot sound if the player is already on.
The alarms will sound at the volume level the player is set to
before it is turned off.
3.






Time & Alarm Function