Night Optics Ambia Gen 3 Gated 1x Night Vision Mono-Goggle - Manual (Page 2)

OPERATION
1. Battery Installation
!WARNING!
Prior to installing the battery make
sure that day time protective cover
is fitted over the lens. Excessive
light can damage intensifier module
and void warranty
5
2. Controls
a. ON/OFF Switch (10). Turn this switch clockwise
once to turn the unit ON. Turn it counterclockwise
to turn the unit OFF. Check the battery for the
required 3V current if the unit fails to turn on.
b. IR illuminator operation (10). IR illuminator is
intended for providing additional illumination in
especially dark conditions. Use this feature with
caution since active IR illuminator can be seen by
other night vision devices. Turn switch clockwise to
the IR position. Rotate switch counterclockwise to
the ON position to turn the IR illuminator OFF. IR
illuminator cannot be turned ON when the main unit
is turned OFF.
c. Focusing the image. Looking at the object, rotate
the eyepiece focusing ring (5) until the sharpest
image is achieved. Adjust the front objective (3) to
achieve the sharpest image for varying distances.
Adjust the eyepiece focus again if needed. Once
the eyepiece is set for your eyesight it does not
need to be refocused for differences in distance.
Only front objective has to be adjusted in order to
achieve maximum resolution.
NOTE: The image will be seen only when the
objective lens and eyepiece are properly fo-
cused. The objective focus lens focuses on the
objects at varying distances and eyepiece focus
adjusts to the individual eyesight. These
adjustments operate independently and
must be made separately.
6
3. Head Mount Attachment (optional)
7
4. Head Mount Controls
The head mask rotary
adapter design makes
it possible for you to
operate using right or
left eye on your choice.
To move the PREDA-
TOR to the most com-
fortable position:
8