Night Optics TG-7 Thermal Goggle/Binocular (30Hz) - Manual (Page 4)

CAUTION (Section I):
Do not remove the housing. There are no user serviceable parts inside. Refer all servicing to
Night Optics USA, Inc.
WARNING (para. 3-1):
Ensure that the switch is in the OFF position before installing or removing batteries, and
connecting or disconnecting to any external power source.
WARNING (para 3-1):
Ensure that the input power does not exceed 24VDC: use a power converter if needed.
WARNING (para 4-1):
Breaking the seal on the Back Plate (see b above) invalidates the warranty.
DO NOT BREAK THE SEAL.
WARNING (para 4-6):
Purging is not user level maintenance. Contact Night Optics or your Support Maintenance
activity.
CAUTION (para 4-7):
Do not store the NO/TG-7 with the batteries installed.
WARNING (para 5-2):
Do not connect the NO/TG-7 to any external power source while the unit is turned on.
EXPORT RESTRICTIONS:
Export of Thermal devices is subject to United States Export rules and regulations. Valid
export licenses may be issued by the U.S. Department of Commerce or the U.S. Department of
State, Directorate of Trade Controls, in accordance with the International Traffic in Arms
Regulations (ITAR), Title 22, Code of Federal Regulations 120-130. Consult Night Optics USA,
Inc. for additional information regarding export requirements.
WARNINGS AND CAUTIONS