Night Optics D-930 50mm Throw-Lever Day/Night Adaptor - Manual (Page 2)

OPERATION
1. D-930 Adaptor 4. 4mm adjustable retainer
2. D-930 inlet 5. 2mm locking screw
3. Throw lever 6. Objective inlet
Initial Adjustment
1. Use 2mm Allen wrench to loosen locking
screw (fig. 5)
2. Pull lever to the upright position (fig. 3)
3. Insert front objective of day scope (fig. 6)
4. Lower lever to locked position (fig. 3)
5. Use 4mm Allen wrench to tighten retainer
bolt (fig. 4)
6. Use 2mm Allen wrench to tighten locking
screw (fig. 5)
TECHNICAL SPECIFICATIONS
Using the D-930 Adaptor (See illustration below)
1. Thread the D-930 day/night adaptor assembly on to the back of the D-930 night vision device.
2. Pull lever to upright position to loosen the assembly, slip it on to the front objective of the day scope
3. Lower the lever to the locked position to secure the D-930 to the day scope.
D-930
Day Scope
D-930
Adaptor
Dimensions: 2.125” x 2.875” x 2.4375”
Weight: 6.4oz (181 g)
Warranty: 1 year
Note:
Depending on frequency of use, this adaptor may require
periodic readjustment in order to maintain perfect fitment
*Allen wrenches included