Iphone night vision camera adaptor – Night Optics iPhone 4/5 Camera Adaptor Kit (Fits: PVS-7/14) User Manual

Page 2

Advertising
background image

1

2

3

To remove the rubber eyecup turn the diopter towards the

left side of the scope so that it is fully extended out.

Place the index finger all the way inside the eyecup and

the thumb on the other side and gently lift up over the

retainer ring and pull it off.

Ensure that the threads on the iPhone adaptor ring are

clean and clear of debris.

Thread the adaptor ring into the eyepiece of the weapon

scope. It should be firm, take care not to over-tighten.

Thread the eyepiece ring onto the iPhone adaptor base.

Before fully tightening, position the adaptor at the desired

angle and adjust the locking ring accordingly.

We recommend using landscape mode to maximize the

field of view. Tap the screen to focus the image.

4

Instructions

Fits: 740 | 750 | 760 Weapon Sights

IPHONE NIGHT VISION CAMERA ADAPTOR

Thread on/off

MADE IN THE USA

CAM-IPBWP

Advertising