Petsafe 350 m Add-A-Dog® Extra Receiver Collar - Manual (Page 15)

www.petsafe.net 15
Dog 2 Receiver Collar
1. With the Receiver Collar off your
pet, turn the Receiver Collar off.
2. Press and hold the On/Off button
for 5 seconds.
3. The Receiver Collar will beep and
the LED will fl ash.
4. Press Dog 2 the Upper Right or
Lower Right button.
5. The Receiver Collar will respond
and pair.
6. If the Receiver Collar does not beep
twice, please contact the Customer
Care Centre. For a listing of
Customer Care Centre telephone
numbers, visit our website at
www.petsafe.net.
Digital Dispay
Dog 1 Tone
Dog 2
Tone
Charging Jack
(with cover)
Transmitter Antenna
Dog 1
Stimulation
Dog 2
Stimulation
+2 Boost
(see table below)
Button Functions
for Dog 2 Mode
____________________________________
Remote Transmitter Functions for Dog 2 Mode
Upper Left Button Dog 1 Tone
Lower Left Button Dog 1 Stimulation Only
Dog 1 +2 Boost Press +2 Boost and the Lower Left
Button simultaneously
Upper Right Button Dog 2 Tone
Lower Right Button Dog 2 Stimulation Only
Dog 2 +2 Boost Press +2 Boost and the Lower
Right Button simultaneously
Dog 1/Dog 2 Correction Levels
To change the correction level for Dog 1 or Dog 2, press and hold the +2
Boost button for 5 seconds. Both Dog 1 and Dog 2 correction levels will
appear. You can now use the Upper Left button to increase the correction level
for Dog 1 and Lower Left button to decrease the correction. For Dog 2, press
Upper Right button to increase the correction level and Lower Right button
to decrease. To lock the correction levels for Dog 1 and Dog 2, press the +2
Boost button.