Petsafe 400 m Remote Trainer Add-A-Dog - Manual (Page 13)

www.petsafe.net 13
Test Light Instructions
1. Turn the Receiver Collar on.
2. Hold the Test Light Contacts to the Contact
Points.
3. Press a Stimulation Button on the Remote
Transmitter.
4. The Test Light will fl ash.
Note: At higher Stimulation Levels, the Test Light
will fl ash brighter.
5. Turn the Receiver Collar off.
Save the Test Light for future testing.
Note: If the Test Light does not fl ash, recharge the battery and re-test. If Test Light still
does not fl ash, contact the Customer Care Centre or visit our website at www.petsafe.net.
Important: The Test Light Tool can be used to tighten the Contact Points.
This Receiver Collar has special waterproof Contact Points that will crack
if they are over-tightened. If your Contact Points ever become loose, do
not turn them any more than one-quarter turn beyond fi nger tight.