Modes of operation – Petsafe Deluxe Bark Control User Manual

Page 8

Advertising
background image

8 www.petsafe.net

Modes of Operation

• To turn the Bark Control Collar ON, press and

release the Mode Push-button. The unit will
fl ash the Indicator Light Green 1 time for Low
Mode, 2 times for Medium Mode and 3 times
for High Mode.

• To turn the Bark Control Collar OFF, press and

hold the Mode Push-button for 4-5 seconds.
When the unit turns off, it will fl ash the Indicator
Light Red 5 times to indicate the unit is turning
off. Turn the Bark Control Collar OFF when not
in use to conserve battery power.

Mode

Push-button

Indicator

Light

Sound

Activated

Sensor

• Begin use of the Bark Control Collar on the Low Mode and only increase to

the Medium Mode if your dog does not respond. When the collar is in the
Low Mode, the Indicator Light will fl ash green once every 5 seconds.

• If your dog does not respond to the Low Mode, increase to the Medium

Mode by pressing the Mode Push-button and holding it for 2-3 seconds and
then releasing it. The collar will advance from Low to Medium Mode and
the Indicator Light will now fl ash 2 times every 5 seconds.

• If your dog does not respond to the Medium Mode, increase to the High

Mode by pressing the Mode Push-button and holding it for 2-3 seconds and
then releasing it. The collar will advance from Medium to High Mode and
the Indicator Light will now fl ash 3 times every 5 seconds.

• You can verify your Bark Control Collar is working properly by setting it to the

Test Mode. To enter the Test Mode, advance the collar to the High Mode by
pressing and releasing the Mode Push-button as described above, then press
and hold the Mode Push-button for 2-3 seconds and then release it. This will
advance the collar from High to Test Mode and indicate the new Mode by a
solid orange indicator light. DO NOT USE this Mode for normal operation.
See “To Test the Bark Control Collar” for more information on using this
mode. To exit the Test Mode press the Mode Push-button for 2-3 seconds
and then release it. This will advance the collar from Test to Low Mode and
indicate the Low Mode with 1 fl ash of the Indicator Light every 5 seconds.

Note: If the Bark Control Collar is turned OFF while in Test Mode, it will begin in
Low Mode when turned back on.

Advertising