Petsafe Deluxe Bark Control - Manual (Page 8)

8 1-800-732-2677 www.petsafe.net 9
Modes of Operation
To turn the Bark Control Collar ON, press and release the •
Mode Push-button. The unit will flash the Indicator Light
Green 1 time for Low Mode, 2 times for Medium Mode and
3 times for High Mode.
To turn the Bark Control Collar OFF, press and hold the
•
Mode Push-button for 4-5 seconds. When the unit turns off, it
will flash the Indicator Light Red 5 times to indicate the unit
is turning off. Turn the Bark Control Collar OFF when not in
use to conserve battery power.
Begin use of the Bark Control Collar on the Low Mode and
•
only increase to the Medium Mode if your dog does not
respond. When the collar is in the Low Mode, the Indicator
Light will flash green once every 5 seconds.
If your dog does not respond to the Low Mode, increase to
•
the Medium Mode by pressing the Mode Push-button and
holding it for 2-3 seconds and then releasing it. The collar will
advance from Low to Medium Mode and the Indicator Light
will now flash 2 times every 5 seconds.
Mode
Push-button
Indicator
Light
Sound
Activated
Sensor
If your dog does not respond to the Medium Mode, increase to the High Mode by pressing the •
Mode Push-button and holding it for 2-3 seconds and then releasing it. The collar will advance
from Medium to High Mode and the Indicator Light will now flash 3 times every 5 seconds.
You can verify your Bark Control Collar is working properly by setting it to the Test Mode. To enter
•
the Test Mode, advance the collar to the High Mode by pressing and releasing the Mode Push-
button as described above, then press and hold the Mode Push-button for 2-3 seconds and then
release it. This will advance the collar from High to Test Mode and indicate the new Mode by a
solid orange indicator light. DO NOT USE this Mode for normal operation. See “To Test the Bark
Control Collar” for more information on using this mode. To exit the Test Mode press the Mode
Push-button for 2-3 seconds and then release it. This will advance the collar from Test to Low
Mode and indicate the Low Mode with 1 flash of the Indicator Light every 5 seconds.
Note: If the Bark Control Collar is turned OFF while in Test Mode, it will begin in Low Mode when
turned back on.
Indicator Light Functions
Indicator
Light
Color
Number
of
Flashes
How Often? Indication
None None Unit is Off.
Green 1 Once Every 5 Seconds Low Mode is active and battery is good.
Green 2 Once Every 5 Seconds Medium Mode is active and battery is good.
Green 3 Once Every 5 Seconds High Mode is active and battery is good.
Red 3 Once Every 5 Seconds Battery is low and needs to be replaced.
Red 5 Once Only Unit turning Off.
Orange Solid Solid Test Mode is active.