Function and response table – Petsafe Deluxe In-Ground Cat Fence™ User Manual

Page 9

Advertising
background image

www.petsafe.net 9

To set Correction Level

Read all the steps before attempting to set the Correction Level.

1. Place the magnet on the Correction Level Key Ring next to the Magnet Key Dot

on the Receiver Collar. The Receiver Indicator Light will come on.

2. Remove the magnet from the Key Dot. The number of fl ashes indicates the

Correction Level.

3. To increase the Correction Level, place the magnet next to the Magnet Key Dot

within 5 seconds of performing the above step. The number of fl ashes indicates
the new Correction Level.

The Correction Levels increase in strength from 1 to 5. Activating the Magnet
Key Dot while the Receiver Collar is on level 5 will cause the Receiver Collar to
revert to level 1. Refer to the Function and Response Table below to choose the
Correction Level that best fi ts your cat.

The Receiver Collar is equipped to automatically increase the level of Static
Correction the longer your cat remains in the Static Correction Zone if the collar is
set at level 2 or above.

(Bottom)

(Top)

The Receiver Indicator Light also acts as a low battery indicator, fl ashing every 4 to 5 seconds when battery
replacement is required.

Function and Response Table

Indicator Light
Response

Correction Level Receiver Collar Function

Temperament of cat

1 Flash

1

No Static Correction, Beep Only

2 Flashes

2

Low Static Correction

Timid

3 Flashes

3

Medium Static Correction

Timid or Average

4 Flashes

4

Medium-High Static Correction

Average or High Energy

5 Flashes

5

High Static Correction

High Energy

Flashes once every
4 to 5 seconds

Low Battery

Note: Begin training with Correction Level 2 and only increase if your cat does not respond to the Static Correction.

Advertising