Petsafe Deluxe In-Ground Cat Fence™ - Manual (Page 6)

6 1-800-732-2677
Sample Layouts
Sample 1:
Perimeter Loop
(Single Loop)
The Perimeter
Loop is the
most common
layout. This will
allow your cat to
freely and safely
roam your entire
property (2C). It
can also protect
gardens, pools and
landscaping (2D).
Sample 2 (2E): Perimeter Loop Using Existing
Fence (Single Loop)
This layout allows you to include your existing fence as
part of your layout and keep your cat from jumping out or
digging under your existing fence. It reduces the amount
of wire which will need to be buried. From the Fence
Transmitter, run the wire to A, A to B, B to C, C to D,
D to E, E to A, twist the wires from A back to the Fence
Transmitter. See the “Install the Boundary Wire” section
for more information on attaching the wire to a fence.
Double Loop
A Double Loop must be used when you are not establishing the Boundary Zone on all sides of your property.
When using a Double Loop, the Boundary Wire must be separated by a minimum of 3 TO 5 FEET to avoid
canceling the signal. Remember that a Double Loop will require twice as much wire.
E
F
B A
D
C
E F
C
A
D
B
Sample 3 (2F): Front or Back
Yard Only (Double Loop)
From the Fence Transmitter, run
the wire to A, A to B, B to C, C
to D, D to E, E to F, make a U-
turn and follow your path all the
way back to A, keeping the wire
separated 3 to 5 feet. Twist the
wire from A back to the Fence
Transmitter.
B
A 3-5'
Sample 4 (2G): Front
Boundary Only
(Double Loop)
From the Fence Transmitter,
run the wire to A, A to B, B
back to A keeping the wire
separated 3 to 5 feet. Twist the
wire from A back to the Fence
Transmitter.
E
B
D
C
A
3-5'
Sample 5 (2H): Lake Access
(Double Loop)
From the Fence Transmitter,
run the wire to A, A to B,
make a U-turn and go to C, C
to D, D to E, make a U-turn
and follow your path all the
way back to A keeping wire
separated 3 to 5 feet. Twist
the wire from A back to the
Fence Transmitter.