Petsafe Deluxe Little Dog Spray Bark Control - Manual (Page 7)

6 www.petsafe.net www.petsafe.net 7
EN
FR
ES
NL
IT
DA
DE
Ensure a Proper Spray Pattern
For the PetSafe ® Little Dog Deluxe Spray Bark Control Collar to perform properly, the nozzle
must be positioned correctly and there must be a
clear path from the Spray Nozzle to your dog’s snout.
Follow these steps:
1. Make sure the PetSafe
®
logo on the top of the unit is
facing upward and the Spray Nozzle is angled out
and pointing up towards the dog’s snout.
2. For long-haired dogs, it may be necessary to trim
the neck hairs along the path of the spray. It is
important that the spray reaches the dog’s snout to
be effective.
On/Off Battery Module
The PetSafe ® Little Dog Deluxe Spray Bark Control Collar is packaged with the battery module
installed in the “OFF” position. To activate the collar, use a coin to turn the Battery Module
counter clockwise until the arrow lines up with the “ON” position. If the PetSafe ® Little Dog
Deluxe Spray Bark Control Collar is not going to be used on the dog immediately leave it in
the “OFF” position.
To Insert and Remove the Battery
Note: Do not install the battery while the Bark Control Collar is on your dog.
A replacement PetSafe
®
battery (RFA-188) can be found at many retailers. Visit our website
at www.petsafe.net to locate a retailer near you and for a listing of Customer Care Centre
telephone numbers in your area.
ON OFF
ON OFF