Petsafe Deluxe Outdoor Bark Control - Manual (Page 10)

10 www.petsafe.net
EN
FR
NL
ES
IT
DE
6. After setting the TIMER 2 OFF time, the LCD display menu will automatically default to TIMER
2 ON mode. This step must be completed for the Timer 2 sequence
to be set.
7. Press and release the H button once and “0:00” will fl ash (9). Note:
In 12 hour time format “12:00AM” will fl ash.
8. Press and release the H button to the correct hour (if in 12 hour time
format, be sure to note the AM/PM setting).
9. Press and release the M button to the correct minutes.
10. Press and release the Select button to confi rm the TIMER 2 ON time.
11. After confi rming the time, the Deluxe Outdoor Bark Control will automatically switch to RESET
mode in the LCD display menu. Continue to press and release the Select button until the LCD
display returns to the clock (3). If you have scheduled Timer 2 it will continue to turn OFF/
ON daily until the time is reset or the battery is replaced.
Reset the Clock and Timers
1. Press and release the Select button until “rSt” fl ashes in the LCD display.
2. Press and hold the H button for 5 seconds. Continue to hold the H
button and then press and release the M button.
3. All times are now reset.
Note: To keep the clock time and reset only the Timer 1 and/or Timer
2 times, you do not have to reset all times. Press and release the Select button to scroll through
the LCD display menu options until you arrive at the timer you wish to reset. Press the H or
M buttons to change the time. Press the Select button to confi rm the updated time. Press and
release the Select button until the LCD display menu returns to the clock.
Test the Deluxe Outdoor Bark Control
Important: When testing the Deluxe Outdoor Bark Control no dog(s) should be within range of
the unit to ensure they don’t receive a stimulation while testing.
1. Press and hold the H and M buttons simultaneously for 3 seconds.
2. The Deluxe Outdoor Bark Control will display “tSt” to indicate it is in
Test Mode.
3. Say the word “Bark” loudly or blow into the microphone located on
the top front of the unit.
4. The Deluxe Outdoor Bark Control will detect this sound and emit 3
short beeps and fl ash the red LED to show it is working.
5. You may repeat steps 3 – 4 if necessary to ensure the unit is working.
6. After 30 seconds the Test Mode will automatically time-out and the unit will return to normal
operation. You may also press and release the Select button to end the Test Mode.
9