Petsafe DIY Box Kennel - 2.29 m (W) x 2.29 m (D) x 1.82 m (H) - Manual

Step-by-Step Assembly Instructions
PetSafe ®
Do-It-Yourself Dog Kennel
Tools needed:
or
1 /
2
” and 9 /
16
”
Step 1 CHECK PARTS BEFORE ASSEMBLY:
1 - gate
1 - roll chain
link fabric
8 - bent tubing
(corner rail)
2 - tension rod
Finished size: 7 ½' x 7 ½' x 6' high,
56 ¼ square feet.
1 - gate latch
20 - Clamps
10 - Clips
1 - Tie wires (Bag)
4 large carriage
bolts
10 - medium
carriage bolts
4 - large hex
nuts
( 3 ⁄
8
" hex nut)
10 - small
hex nuts
( 5 /
16
" hex
nut)
Missing parts? Please contact the Customer
Care Center at 1-888-632-4453.
(one end swedged = narrowed)
(both ends plain)
5 - straight tubing
2 - male hinges
2 - female hinges