Connect the bottom frame, Add uprights – Petsafe DIY Dog Kennel - 2.29 m (W) x 3.96 m (D) x 1.83 m (H) User Manual
Page 4
Advertising
4
www.petsafe.net
Connect the Bottom Frame
Important: Assemble on a level surface.
1. Gather 4 corner rails and
2 frame rails.
2. Point all swedged ends
clockwise.
3. Slip swedged ends of
tubing into the next piece
of tubing.
__________________________________________________________________________________________________
Add Uprights
1. Gather 6 uprights, 12 clamps, 6 -
5
/
16
" x 2" carriage bolts with nuts.
2. With the nut on top, loosely clamp all posts to the bottom frame at each corner and half way along
each side (2A).
3. Stand corner posts up and tighten clamps. Let the center posts lie on the ground.
Step
1
Step
2
2A
Advertising