Operating instructions, Fountain cleaning – Petsafe Drinkwell® Original Pet Fountain User Manual

Page 6

Advertising
background image

www.petsafe.net



OPERATING INSTRUCTIONS

Set your desired flow rate with the flow control knob, which is

next to the ramp inside the bowl. When the knob is in the 10

o’clock position, flow is at its lowest. When the knob is in the 2

o’clock position, flow is at its highest.

Add water to the bowl as needed. Do not let the water level

fall below the flow control knob or you may burn out the motor.

Never pick up a full fountain by the filter housing. Only pick up

the fountain by placing both hands underneath the base of the

fountain and grip the sidewalls for a sturdy hold.

7)

8)

FOUNTAIN CLEANING

Filters: Change every 2 to 4 weeks

1)

2)

3)

Filters should be changed every two to four weeks. Replace

the filters more frequently when using the fountain for multiple

pets or pets that produce a lot of saliva.

Filters are an added feature of the fountain. Their use is not

required for normal operation, but will keep the fountain water

cleaner.

Filters may be rinsed out when the fountain is cleaned. Never

wash the filter with soapy water, you will not be able to remove

the soap residue.

Fountain: Clean once a week

Unplug fountain, remove housing lid, and

remove the filter.

Empty the water out of the fountain.

Remove the filter housing by pressing in the

tabs at the sides and lifting up. (See Fig. 3)

1)

2)

3)

Fig. 3

Advertising