Petsafe Drinkwell® Pagoda Fountain User Manual
Page 2
3
2
Table of Contents
Important Safety Instructions.............................................
Components.......................................................................
Operating Instructions........................................................
Filters & Fountain Cleaning................................................
Pump Maintenance............................................................
Fountain Reassembly.........................................................
The Fountain & Your Environment.....................................
Manufacturer’s Safety Instructions.....................................
1
2
3
6
8
9
11
12
1) Carefully remove all the fountain components from the packaging
and set aside prior to assembly.
2) As with any electrical device, check the electrical cord for any tears
or damage before use.
3) Place the foam filter around the pump by inserting the pump into the
filter from the top, make sure the cord rests on top of the filter (Fig.1).
DO NOT RUN DRY - FOR INDOOR HOUSEHOLD USE ONLY
Bowl
Pump
70 oz. Capacity
Charcoal
Filter
Foam
Filter
Components
Adaptor
Rubber
Grommet
Tower
PAGODA FOUNTAIN
Thank you for choosing the PetSafe
®
brand. You and your pet deserve a
companionship that includes memorable moments and a shared understanding
together. Our products and training tools promote a lifestyle of protection, teaching
and love; essentials that influence memories for a lifetime. If you have any questions
about our products or training your pet, please visit our website at www.petsafe.net or
contact our Customer Care Center at 1-800-732-2677. Please register your product
within 30 days of purchase at www.petsafe.net.
Operating
Instructions
Rubber
Cap
Filter Housing
Case
Inline Plug
Fig.3
Pump
Outflow
Fig. 2
Top
Bottom
4) Take the bowl and place the
pump inside the rectangular
indention. Make sure the
circular opening on top of
the pump is positioned in the
bottom left corner (Fig. 2).
The foam filter will be slightly
compressed between the pump
and the post. Press down
on the pump to engage the
suction cups. Once the pump is
securely in place, feed the cord
over and through the raised
post and out the notch on the
bottom side of the bowl (Fig. 3).
Cord rests
on top
Fig. 1