Petsafe In-Ground Fence™ (Older Model) User Manual
Page 2
2
Quick Start Guide for Installing Your System
The Standard Pet Containment System is simple and easy to use. Follow these
8 easy steps. Additional details can be found on the following pages.
1
2
3
Layout
Make a layout that is suitable for your yard. Refer to
sample layouts under "Laying out the System"
Locating and mounting
the Fence Transmitter
Mount the fence transmitter in a dry location. A
mounting template is located on the back cover of
this manual.
Layout the Boundary Wire
Lay the boundary wire above the ground according
to your layout. Insert stripped wire ends into wire
terminals of the transmitter.
ENGLISH
4
Insert the Battery into the Receiver
Insert the module by aligning the battery module arrow with
the small arrow on the side of the case, and press the module
down into the battery compartment. Place a coin in the slot
as shown, and turn the coin clockwise until it stops. The
battery module arrow should now be aligned with the lock
symbol.