Petsafe Indoor Bark Control, Ultrasonic - Manual (Page 8)

8 www.petsafe.net
To Insert and Remove the Battery
1. The PetSafe ® Indoor Bark Control requires a 9-volt battery (not included).
2. The battery door is located on the back of the unit. Pull the battery door open.
3. Install the 9-volt battery with the positive side oriented as shown.
4. Replace the battery door by positioning the top edge, and snap the bottom of battery door
into place.
Battery Life
Average battery life is 2 months, depending on how often the dog barks. To conserve battery
life, remove the battery when the Indoor Bark Control is not in use.