Step 3 position the boundary wire – Petsafe Little Dog Deluxe In-Ground Fence™ User Manual
Page 9
9
www.petsafe.net
EN
FR
ES
NL
IT
DE
E
F
B
A
D
C
E
F
C
A
D
B
1.5 m
(5 ft)
1.5 m
(5 ft)
B
A
1.5 m
(5 ft)
E
B
D
C
A
1.5 m
(5 ft)
Sample 3 (2F): Front or Back
Property Only (Double Loop)
From the Fence Transmitter, run the
wire to
A
,
A
to
B
,
B
to
C
,
C
to
D
,
D
to
E
,
E
to
F
, make a U-turn and follow your
path all the way back to
A,
keeping the
wire separated at least 1.5 m (5 ft).
Twist the wire from
A
back to the
Fence Transmitter.
Sample 4 (2G): Front
Boundary Only (Double Loop)
From the Fence Transmitter, run the
wire to
A
,
A
to
B
,
B
back to
A
keeping
the wire separated at least 1.5 m
(5 ft). Twist the wire from
A
back to
the Fence Transmitter.
Sample 5 (2H): Lake Access
(Double Loop)
From the Fence Transmitter, run the
wire to
A
,
A
to
B
, make a U-turn
and go to
C
,
C
to
D
,
D
to
E,
make
a U-turn and follow your path all
the way back to
A
keeping wire
separated at least 1.5 m (5 ft).
Twist the wire from
A
back to the
Fence Transmitter.
Sample 6 (2
I
): Wire Loop Attached to Existing Fence (Double Loop)
This layout allows you to include your existing fence as part of your layout and
keep your pet from jumping out or digging under your existing fence. It reduces
the amount of wire which will need to be buried. Run the wire from the Fence
Transmitter to
A
,
A
to
B
,
B
to
C
,
C
to
D
,
D
to
E
,
E
to
F,
make a U-turn and follow your
path all the way back to
A,
keeping the wire separated at least 1.5 m
(5 ft)
.
Twist
the wire from
A
back to the Fence Transmitter. See the “Install the Boundary Wire”
section for more information on attaching the wire to a fence.
STEP 3
Position the Boundary Wire
Lay out the Boundary Wire using your planned boundary and test the system BEFORE burying the wire or
attaching it to an existing fence. This will make any layout changes easier. Work carefully. A nick in the
wire insulation can diminish the signal strength and create a weak area where your pet can escape.
Running the Boundary Wire parallel to and within 3 m (10 ft) of electrical wires,
neighbouring containment systems, telephone wires, television or antenna cables, or
satellite dishes may cause an inconsistent signal. If you must cross any of these, do
so at 90-degree angles (perpendicularly) (
3A
).
If separating the wire by at least 3 m (10 ft) from a neighbouring containment
system’s wire does not reduce the inconsistent signal, contact the Customer
Care Centre.
Boundary Wire
3 m
(10 ft)
3 m
(10 ft)
Buried Cabl
e
90˚
E
F
B
A
D
C
1.5 m
(5 ft)
2I