Petsafe Manual 4 Way Locking Classic Cat Flap - Manual (Page 4)

b) In Glass
* It is not possible to cut holes in toughened glass or double glazed
units except at the time of manufacture. Please consult a glazier.
The cat fl ap requires a circular cut-out with a diameter of 212mm (8 3 /
8
”).
(Fig. 4).
Not to scale - for best results you should refer
your glazier to the enclosed cutting template.
c) In Walls
Follow the instructions for “Wood and PVC/
uPVC/Metal”, by using the enclosed
cutting template. Please note that
additional tools, materials and
competent DIY skills may be
required.
Glass windows & doors,
single and double glazed*
212mm (8 3 /
8
”)
FIG.4
Fits brick walls
3