Petsafe Pawz Away® Mat - Manual (Page 5)

www.petsafe.net 5
Operating Guide
Prepare the Pawz Away ™ Mat
After removing the Mat from the box, unroll the Mat from the cylinder and lay
flat. The Controls are located inside the Cylinder. Gently squeeze the cylinder
and the controls will slide out. There are two snaps on the Mat and two snaps on
the back of the controls. Snap the two together. After inserting the battery, your
Mat is now ready to use.
To Insert and Remove the Battery
• The PetSafe ® Pawz Away ™ Mat utilizes a replaceable 9-volt battery (not included).
The battery door is located on the front/bottom of the Controls. Slide the battery
door open.
• Insert the 9-volt battery.
• Replace the battery door by positioning the top, and sliding the battery door back
into place.
TON
E STAT
IC LOW BA
T.
TON
E STAT
IC LOW BA
T.
TONE
STAT
IC LOW BA
T.
Slide Battery Door out Insert 9-volt battery Slide Battery Door
back into place
Battery Life
Average battery life is 3-4 months. To conserve battery life, turn the Mat off using the
Pushbutton on the Controls while the Pawz Away
™ Mat is not in use.
________________________________________________________________
Choose from Three Training Options
The PetSafe ® Pawz Away ™ Mat offers three training options designed to shorten training
and promote good behavior. Options include Tone+Stimulation, Stimulation
without Tone and Tone without Stimulation.
When choosing Tone+Stimulation the Mat provides a tone and sends immediate
correction when your pet steps onto the Mat. The transparent Pawz Away
™ Mat contains
several small wires that sends a quick burst of energy (stimulation) through the Mat
when the pets paw touches the Mat. The energy is harmless but startling to your pet.
Most pets learn very quickly to avoid the area where the Pawz Away
™ Mat is located.
Step
1
Step
2