Step, Prepare the receiver collar – Petsafe Rechargeable Add-A-Dog® Extra Receiver Collar User Manual
Page 14
Advertising
14 1-800-732-2677
www.petsafe.net 15
Prepare the Receiver Collar
Your Receiver Collar comes with
Short Contact Points. Use the
Long Contact Points for pets
with long or thick hair. Tighten
the Contact Points using the
Test Light Tool (2A) one-half
turn beyond finger tight. Check
tightness weekly.
Turning the
Receiver Collar ON
Press and hold the Mode Button
continuously for 5 seconds (2B).
The Green or Yellow or Red
Receiver Indicator Light will turn
ON for 5 seconds to indicate
battery status, followed by the
Red Receiver Indicator Light
flashing the Static Correction
Level Settings.
2A
2B
Mode
Button
Step
2
Advertising