Petsafe Stay+Play Wireless Fence PIF17-13478 - Manual (Page 17)

www.petsafe.net 17
DE
NL
IT
FR
ES
EN
PHaSe 1
Day 1 - Boundary awareness
Tone Only Training Mode
Perform three sessions on day 1, each training session lasting 10 to15 minutes.
Goal:
To have your pet learn that the Boundary Flags and warning beep from the Receiver Collar define the new
Pet Area.
Setup:
• Program the Static Stimulation level on the Receiver Collar to level 1, tone only training mode.
• Put a separate non-metallic collar on your pet’s neck ABOVE the Receiver Collar and attach a lead.
Be sure the extra collar does not put pressure on the Contact Points.
• Have tiny pieces of treats that your pet will find desirable available.
• Have your pet’s favourite play toy available.
Steps:
1. Begin by walking your pet on a lead in the Pet Area. Calmly praise and talk to your pet.
2. Move toward the Boundary Flags (
1a). Keep your mood happy.
3. With full control of your pet on a lead, walk to the Boundary Flags. As your pet enters the Boundary Zone, the
Receiver Collar will begin to tone ( 1B). Allow your pet to stay in the Boundary Zone for up to 2 seconds then
gently help him back into the Pet Area ( 1C). Immediately praise and offer your pet a treat as he enters the Pet
Area, even if you have helped with the lead.
4. Repeat this process at the same Boundary Flag until your pet resists going into the Boundary Zone.
5. Aim to master 3 to 4 Boundary Flags per session. Make this FUN! Praise if your pet quickly retreats or resists
going into the Boundary Zone.
1a 1B 1C