Petsafe Vibration Bark Control Collar - Manual (Page 13)

13 www.petsafe.net
FR
ES
NL
IT
DE
EN
Troubleshooting
My dog keeps barking
(does not respond to the
Vibration Stimulation).
• Tighten the Bark Control Collar and/
or trim your dog’s hair where the
Vibration Points touch his neck to
ensure good skin contact.
• Replace the battery.
• If your dog still does not respond,
contact the Customer Care Centre.
The Green LED light stopped
flashing and there is no
red light.
• Ensure that the battery is properly
installed.
• Replace the battery.
• If the Green LED light is still not
flashing, contact the Customer
Care Centre.
Battery Disposal
Separate collection of spent batteries is required in many regions; check the
regulations in your area before discarding spent batteries. Please see page
8 for instructions on how to remove the battery from the product for separate
disposal. This device operates on 1 battery of the type lithium with a 3 Volt,
160 mAH capacity. Replace only with equivalent battery.