Petsafe Wall Entry Pet Door - Manual (Page 8)

8 1-800-732-2677
7. Slide the B side of the Pet Door into the A side that is already installed on
the inside. The unit will slide together just like it was in the package (4D).
8. Inspect the unit for a snug fi t and any gaps that could cause a draft or
water penetration. Either tighten the fi t or use closed cell foam and/or
silicone caulk in these areas.
9. Enjoy your new Wall Entry Aluminum Pet Door from PetSafe ® .
4A 4D
____________________________________________
Training
Bring your pet to the Pet Door. Temporarily tape both fl aps up and try
to talk your pet into going through. Sometimes it helps for you to be on
one side of the door and your pet on the other. You may try persuading
your pet through the door using a small piece of food or a treat. If your
pet will not go through the door do not force him through the door,
simply wait for your pet to go through on his own.
____________________________________________
Product Warranty
Please register your product online at www.petsafe.net. All parts are covered under warranty for the life of
this product. Labor is covered for the fi rst year of ownership. Thereafter, there is a minimum service charge
for the repair or replacement of the product. Misuse, loss, damage by pet or improper use or handling
is not covered. PetSafe
® will not pay for loss of time, inconvenience, loss of use of your product or any
incidental or consequential damage. Warranty void if product resold.
Please contact the Customer Care Center at 1-800-732-2677 if you need service or for help in
troubleshooting and, if needed, to arrange a repair for your product (a service charge may apply). Also,
please visit our website www.petsafe.net for Frequently Asked Questions and Troubleshooting Tips.