Configuring the idle display – Cisco UNIFIED 7931G User Manual
Page 6
Chapter 6 Customizing the Cisco Unified IP Phone
Configuring the Idle Display
6-6
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
parameter. If you want to override this on a per-phone basis, choose Enabled
or Disabled in the Advertise G.722 Codec parameter on the Product Specific
Configuration area of the Phone Configuration window.
Configuring the Idle Display
You can specify an idle display that appears on the phone screen. The idle display
is an XML service that the phone invokes when the phone has been idle (not in
use) for a designated period and no feature menu is open.
XML services that can be used as idle displays include company logos, product
pictures, and stock quotes.
Configuring the idle display consists of these general steps.
1.
Formatting an image for display on the phone.
2.
Configure Cisco Unified Communications Manager to display the image on
the phone.
For detailed instructions about creating and displaying the idle display, refer to
Creating Idle URL Graphics on Cisco Unified IP Phone at this URL:
In addition, you can refer to Cisco Unified Communications Manager
Administration Guide or to Cisco Unified Communications Manager Bulk
Administration Guide for the following information:
•
Specifying the URL of the idle display XML service:
–
For a single phone—Idle field on the Cisco Unified Communications
Manager Phone Configuration window
–
For multiple phones simultaneously—URL Idle field on the
Cisco Unified Communications Manager Enterprise Parameters
Configuration page, or the Idle field in the Bulk Administration Tool
(BAT)
•
Specifying the length of time that the phone is not used before the idle display
XML service is invoked:
–
For a single phone—Idle Timer field on the Cisco Unified
Communications Manager Phone Configuration window