Ryobi JG001 - Manual (Page 6)

6 — English
FEATURES
PRODUCT SPECIFICATIONS
Motor ...................................................................................................................................................................... 12 Volt DC
Impacts Per Minute ................................................................................................................................................3,600 BPM
Recommended Nail Size ..................................................................................................... Head diameter less than 7/16 in.
Length less than or equal to 3-1/2 in.
kNOW yOUR AUTO HAMMER
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
HAMMERING HEAD
When the trigger is depressed, the anvil inside the hammer-
ing head impacts the nails automatically.
IMPACT SPEED
This tool features an impact speed of 3,600 Beats Per Min-
ute (BPM). Beats Per Minute is the number of impacts per
minute.
LED WORkLIGHT
The LED worklight, located above the switch trigger, illu-
minates when the trigger is depressed. This provides extra
light for increased visibility.
MAGNETIC SLEEVE
The magnetic sleeve holds nails in place while driving nails
into the workpiece, and retracts to ensure that the nails are
flush.
ASSEMBLy
UNPACkING
This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACkING LIST
Auto Hammer
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
tool until the missing parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such altera-
tion or modification is misuse and could result in a hazard-
ous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.