Tools needed, Loose parts list – Ryobi BS902 User Manual

Page 11

Advertising
background image

11

TOOLS NEEDED

The following tools (not included) are needed for making adjustments or installing the blade:

Fig. 5

PHILLIPS SCREWDRIVER

COMBINATION

SQUARE

LOOSE PARTS LIST

MITER GAUGE

4 mm HEX KEY

SAW TABLE

Fig. 4

FLAT HEAD SCREW

TABLE ALIGNING

BOLT

WASHER

WING NUT

RIP FENCE

WING SCREW

WORKLIGHT

Hex Key, 4 mm .............................................................. 1
Rip Fence ...................................................................... 1
Miter Gauge ................................................................... 1
Saw Table ...................................................................... 1
Wing Screw ................................................................... 1
Wing Nut ........................................................................ 1

Table Aligning Bolt ......................................................... 1
Flat Head Screw ............................................................ 3
Worklight ....................................................................... 1
Washer .......................................................................... 1
Switch Key .................................................................... 1
Operator’s Manual (not shown) ..................................... 1

SWITCH

KEY

The following items are included with the tool:

WARNING:

The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.

Advertising