Ryobi P107 User Manual

Safety rules, Operation, 18 v lithium-ion battery pack

Advertising
background image

safety rules

attention. Following this rule will reduce the risk of serious

personal injury.

When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys, nails,

screws, or other small metal objects that can make

a connection from one terminal to another. Shorting

the battery terminals together may cause sparks, burns,

or a fire.

always remove battery pack from your tool when you

are assembling parts, making adjustments, cleaning,

or when not in use. Removing battery pack will prevent

accidental starting that could cause serious personal

injury.

always remove battery pack before storing the device.

always wear eye protection with side shields marked

to comply with aNsI Z87.1. Failure to do so could result

in objects being thrown into your eyes and other possible

serious injuries.

Keep battery pack dry, clean, and free from oil and

grease. always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.

save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions.

CalIfOrNIa PrOPOsItION 65

WarNING:

This product contains chemicals, including lead, known to

the State of California to cause cancer, birth defects and

other reproductive harm.

Wash hands after handling.

WarNING:

read aNd uNderstaNd all INstruCtIONs. Fail-
ure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.

Battery tools do not have to be plugged into an elec-

trical outlet; therefore, they are always in operating

condition. Be aware of possible hazards when not

using your battery tool or when changing accessories.

Following this rule will reduce the risk of electric shock,

fire, or serious personal injury.

do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and pos-

sibly injury.

do not crush, drop or damage battery pack. do not

use a battery pack or charger that has been dropped

or received a sharp blow. A damaged battery is subject

to explosion. Properly dispose of a dropped or damaged

battery immediately.

Batteries can explode in the presence of a source

of ignition, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product

in the presence of open flame. An exploded battery can

propel debris and chemicals. If exposed, flush with water

immediately.

do not charge battery tool in a damp or wet location.

Following this rule will reduce the risk of electric shock.

Charge only with ryobi One+ 18V dual-chemistry

battery chargers. Use of other chargers may result in

personal injury, fire, or damage.

do not charge in an area of extreme heat or cold. It

will work best at normal room temperature. To reduce

the risk of serious personal injury, do not store outside

or in vehicles.

under extreme usage or temperature conditions, bat-

tery leakage may occur. If liquid comes in contact with

your skin, wash immediately with soap and water. If

liquid gets into your eyes, flush them with clean water

for at least 10 minutes, then seek immediate medical

18 V lItHIuM-ION
Battery PaCK

P107/P108 serIes

To register your RYOBI product, please visit:

http://register.ryobitools.com
Use this battery pack for RYOBI ONE+ 18V cordless

products only. Refer to the Operator’s Manual provided with

product. Always mention the model number above when

communicating with us regarding this battery pack.

lItHIuM-ION Battery PaCKs

Lithium-ion batteries deliver fade free power for their entire
run time. Lithium-ion tools will not gradually lose power due
to decreasing battery charge. Instead, power from the battery
pack will drop from full to zero once the full charge has been
drained from the battery. Once this happens, recharging of
the battery is required. It is not necessary to drain the battery
pack completely before recharging.

Battery PrOteCtION features

Lithium-ion battery packs are designed with features that
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.

COld WeatHer OPeratION

The lithium-ion battery pack can be used in temperatures
down to 14°F (-10°C). Put the battery pack on a tool and use
the tool in a light duty application. After about a minute, the
pack will warm up and begin operating normally.

OPeratION

P107

P108

Advertising