Casio CW-L300 User Manual
Page 53
51
E
To apply the font setting to this text:
All of the text in the label
All of the text in the current block
(Free Design Mode only)
All of the text in the current line
Specific characters (Free Design
Mode only)
Select this option:
ALL
BLOCK
LINE
CHARACTER
To change the default font setting
1.
Press FUNCTION and then SET UP to display the SET UP menu.
2.
Use
and
to select DEFAULT FONT and then press SET.
3.
Use
and
to select the font you want to use as the default, and then
press SET.
• The default font you specified will be used first for all new labels. When
inputting text, you can use the procedure above to change the font to another
style, if you want.
To change the font of text you have just input
1.
After inputting the text you want, press FONT.
2.
Use
and
to select the font you want to change to and then press
SET.
3.
On the next screen that appears, select the range of text to which you want
to apply your font setting, and then press SET.
• If you select ALL for Free Design Mode text, press SET. This will apply
the setting and return to the text input screen.
• Selecting any other setting in the Free Design Mode cause a range setting
screen like the one shown below to appear. Use steps 4 and 5 to specify
the range of text.
4.
Use
and
to move the cursor to the first character of the string of
text to which you want to apply the FONT setting, and then press SET.
5.
Use
and
to move the cursor to the last character of the string of
text to which you want to apply the FONT setting, and then press SET.
• This will apply the setting and return to the text input screen.