Ryobi YN500A - Manual (Page 4)

4 — English
GENERAL SAFETY RULES
 Do not exceed the pressure rating of any component
in the system.
 Protect material lines and air lines from damage or
puncture. Keep hose and cords away from sharp objects,
chemical spills, oil, solvents, and wet floors.
WORKLIGHT USE AND CARE
 Store worklight out of the reach of children and other
untrained persons. Worklights are dangerous in the
hands of untrained users.
 Let worklight cool for several minutes after use before
changing the bulb.
 Do not use or permit use of worklight in bed or
sleeping bags. This worklight lens can melt fabric and a
burn injury could result.
 Do not permit children to use worklight unsupervised.
It is not a toy. The temperature of the bulb will become
hot after being on for only a short period of time. This hot
temperature can cause burn injury if touched and can
create sufficient heat to melt some fabrics.
 If wrapped or in contact with fabrics, the worklight
lens can produce sufficient heat to melt some fabrics.
To avoid serious personal injury, never allow the worklight
lens to come in contact with anything.
SERVICE
 Inflator service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
 When servicing an inflator, use only identical replace-
ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of shock or injury.