Ryobi TS1342LBF - Manual (Page 12)

1
FEATURES
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0 ° , 15 ° , -1/ ° , 30 ° , and
45 ° . The -1/ ° and 45 ° positive stops have been provided
on both the left and right side of the miter table.
BEVEL LOCK KNOB
The bevel lock knob securely locks the compound miter
saw at desired bevel angles. Positive stop adjustment
screws have been provided on each side of the saw arm.
These adjustment screws are for making fine adjustments
at 0
° and 45 ° .
ELECTRIC BRAKE
An electric brake has been provided to quickly stop blade
rotation after the switch is released.
MITER FENCE
The miter fence on the compound miter saw has been
provided to hold the workpiece securely against when
making all cuts. The left side is also larger providing ad-
ditional support.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-
through plastic that provides protection from each side of
the blade. It retracts over the upper blade guard as the saw
is lowered into the workpiece.
LASER GUIDE
For more accurate cuts, a laser guide is included with your
miter saw. When used properly, the laser guide makes
accurate, precision cutting simple and easy.
TOOLS NEEDED
The following tools (not included) are needed for making adjustments or installing the blade:
combination SQuare
Framing SQuare
combination wrencH (2)
10 mm ,12 mm
Fig. 5
Hex keY
6 mm