Ryobi P551 - Manual (Page 10)

10
45 33.9 30 15
1 2 3 4 5 6 7
FEATURES
SWITCH TRIGGER
See Figure 4.
The saw will not start until you depress the switch lock with
your thumb then squeeze the switch trigger. To prevent
unauthorized use of the compound miter saw, remove the
battery pack, and lock the switch in the off position. To lock
the switch, install a padlock (not included) through the hole
in the switch trigger. A lock with a long shackle of 5/16 in.
diameter may be used. When the lock is installed and locked,
the switch is inoperable. Store the padlock key in another
location.
The following tools (not included) are needed for making adjustments or installing the blade:
TOOLS NEEdEd
Fig. 5
fraMing square
coMbination square
Fig. 4
padLock
switch
trigger
switch
Lock