US Balance US-FANTASTICO 150g x 0.01 - Manual (Page 2)

CALIBRATION
Turn scale ON wait until “0.0” is displayed, press CAL key, place a 100g calibration weight on the
platform. Your scale will show PASS or FAIL on the display.
If PASS then calibration is complete/If FAIL then change batteries and repeat the above steps.
US Balance Scale Tare Instructions:

Place scale on a horizontal flat surface

Press ON switch
 Wait until “0.0” is displayed.

Place the tare item (weighing tray) on the platform
 Press TARE and wait until “0.0” is displayed.

Add the item(s) you wish to weigh.

Press MODE to change weighing modes.
Automatic Shut-off
The scale will automatically shut-off after 60 seconds of inactivity to help conserve the battery power.
We recommend good quality AAA batteries.
Tested to Comply with FCC Standards