US Balance US-EXTREME 1000g x 0.1g Touch Screen - Manual (Page 2)

RETURN TO ZERO
After weighing an item, if the display does not read “0.0” press the ZERO button to
return to “0.0” and you are ready to weigh again.
CHANGE WEIGHING MODES
Press the “MODE” button to change weighing modes on your scale. This scale has 6
weighing modes: g, oz, gn, ct, dwt , ozt
CALIBRATION
With the scale turned on and placed on a stable surface, press the CAL button and
“500.0” will flash in the display, immediately place a total of 500g weight on the scale.
The scale will reset itself and will give you a PASS message. Calibration is complete.
OPERATING ENVIRONMENT
The optimum operating temperature for the scale is 50-86° F/10-30°C. Rough handling of
the scale will damage the internal sensor; so you must avoid actions such as shaking or
dropping the scale. This is a sensitive piece of electronic equipment and will be affected
by things such as moisture, extreme temperature changes, magnetic fields, careless
handling and misuse.
AUTOMATIC SHUT-OFF
The scale will automatically shut-off after 60 seconds of inactivity this is to help conserve
the battery power. We recommend good quality AAA batteries.