Waterworks Regulator Gooseneck Double Spout Marquee Kitchen Faucet, Metal Wheel Handles and Spray - Manual (Page 5)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
REGULATOR
Gooseneck Double Spout Marquee Kitchen Faucet Installation Guidelines
Page 5 of 5
Rev - 01
10.9.2014
These guidelines have been prepared for the professional contractor to aid in the installation of:
REGULATOR GOOSENECK DOUBLE SPOUT MARQUEE KITCHEN FAUCET WITH METAL WHEEL HANDLES AND
SPRAY (STYLE No. RGKM50, RG50KM UK)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
SERVICING THE MIXING CARTRIDGE:
1. To access the MIXING CARTRIDGE, unthread the
SCREW then remove the HEX COLLAR, LEVER
HANDLE and TRIM PLATE as shown in FIGURE – 11.
2. Unthread the RETAINING COLLAR to expose the
MIXING CARTRIDGE as shown in FIGURE – 11.
FIGURE – 11
 If further assistance is required, please contact Product
Support at 1-800-927-2120 Ext 2 Monday through
Friday, 8am - 6pm EST.
 See the service part document for parts ordering,
available on WATERWORKS.COM.
* Putty contains oil and can cause permanent
discoloration on certain materials such as marble,
granite and any porous surface.
MIXING
CARTRIDGE
RETAINING
COLLAR
TRIM
PLATE
LEVER
HANDLE
HEX
COLLAR
SCREW
MIXING
CARTRIDGE
RETAINING
COLLAR
TRIM
PLATE
LEVER
HANDLE
HEX
COLLAR
SCREW