Waterworks Formwork Handshower On Hook with Metal Handle - Manual (Page 2)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
FORMWORK
Handshower on Hook
INSTALLATION GUIDELINES
Page 2 of 2 4.7.2014
These guidelines have been prepared for the professional contractor to aid in the installation of:
FORMWORK HANDSHOWER ON HOOK (STYLE# FMHS01)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
HANDSHOWER HOSE
FLOW RESTRICTING
CHECK VALVE
HANDSHOWER
HANDSHOWER HOSE
FLOW RESTRICTING
CHECK VALVE
HANDSHOWER
FIGURE - 02
INSPECT THE INSTALLATION:
5. Remove the handshower from the hose. Turn on the
wall valve/diverter (sold separately) to flush out any
debris in the supply line.
6. Inspect all connections for leaks.
7. Turn off supply and re-attach the handshower to the
hose.
¾ Note: The FLOW REGULATING CHECK VALVE is
located in the inlet of the HANDSHOWER and the
CHECK VALVE is located in the outlet of the
HANDSHOWER ELBOW.
¾ If further assistance is required, please contact
Product Support at 1-800-927-2120 (8am-6pm EST).
¾ See service part document for parts ordering,
available on WATERWORKS.COM.