Waterworks Universal Tile-in Shower Drain 6" x 6 - Manual (Page 3)

PRODUCT SUPPORT 800.927.2120 8am - 6pm EST
UNIVERSAL
Tile-in Shower Drain 6" x 6" Installation Guidelines
Page 3 of 3
Rev - 01
7.14.2014
These guidelines have been prepared for the professional contractor to aid in the installation of:
UNIVERSAL TILE-IN SHOWER DRAIN 6" x 6" (STYLE No. UNSD06)
All dimensions are based on original specification and are subject to change and variation.
Please consult your Design Associate for current specifications.
Figure – 05
11. Apply the thinset and install the finished floor.
12. Apply an appropriate amount of thinset into the TILE
COVER to obtain the same height as the surrounding
finished floor then install a square piece of finished floor
material into the TILE COVER.
Figure – 06
13. Place the DRAIN STRAINER into the STRAINER BODY
then place the TILE COVER into the STRAINER BODY.
See Figure – 07.

If further assistance is required, please contact Product
Support at 1-800-927-2120 Ext 2 Monday through
Friday, 8am - 6pm EST.
 See the service part document for parts ordering,
available on WATERWORKS.COM.
* Putty contains oil and can cause permanent
discoloration on certain materials such as marble,
granite and any porous surface.
SECOND
MORTAR
LAYER PEA
GRAVEL
STRAINER BODY
SECOND
MORTAR
LAYER PEA
GRAVEL
STRAINER BODY
TILE COVER
APPLY THIN SET
FINISHED
FLOOR TILE
TILE COVER
APPLY THIN SET
FINISHED
FLOOR TILE
Figure - 07
FINISHED FLOOR
DRAIN STRAINER
TILE COVER
FINISHED FLOOR
DRAIN STRAINER
TILE COVER