Turning the amplifier on, Break-in period – Woo Audio WA6-SE (Special Edition) Headphone Amplifier User Manual

Page 10

Advertising
background image

©2011 WOO AUDIO

tm

 Inc. All rights reserved. 

www.wooaudio.com 

Rev 1.0. June 10, 2011. 

10 

 

Turning the amplifier on:

1. Turn the volume knob to the lowest position.

2. Insert a headphone into either HIGH or LOW impedance output.

3. Turn the power switch knob

from left to right until you hear a click sound. The LED

⑤ 

will light.

4. Observe that all tubes light gradually.

5. Let the tubes warm up for at least 1 minute before turning up the volume.

Front panel diagram:

① High impedance headphone output

② Volume control

③ Low impedance headphone output

④ Power switch

⑤ Power LED indicator

Break-in period:

It is recommended to allow the amplifier to operate 150+ hours so that peak performance can be
realized. An effective way to break-in the amp is to run the amp normally with music playing.
Please do not leave the amp running continuously.



Advertising