First aid measures, Fire-fighting measures, Accidental release measures – Chemtronics Chemask® W - Water Soluble CW8 User Manual

Page 3: Handling and storage

Advertising
background image

Chemask® W

4. First aid measures

No specific treatment. Treat symptomatically. Contact poison treatment specialist
immediately if large quantities have been ingested or inhaled.

Notes to physician

:

Use an extinguishing agent suitable for the surrounding fire.

5. Fire-fighting measures

Extinguishing media

Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.

In a fire or if heated, a pressure increase will occur and the container may burst.

Special protective
equipment for fire-fighters

Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.

:

Special exposure hazards

:

None known.

Suitable

:

Not suitable

:

Hazardous thermal
decomposition products

:

Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
metal oxide/oxides

Flammability of the product

:

No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment (see Section 8).

Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated
absorbent material may pose the same hazard as the spilled product. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.

Environmental precautions

6. Accidental release measures

:

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Personal precautions

:

Large spill

:

Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.

Small spill

:

Methods for cleaning up

Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas.
Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist.
If during normal use the material presents a respiratory hazard, use only with adequate
ventilation or wear appropriate respirator. Keep in the original container or an approved
alternative made from a compatible material, kept tightly closed when not in use. Empty
containers retain product residue and can be hazardous. Do not reuse container.

7. Handling and storage

Handling

:

3/11

0706

5/1/2014.

Advertising