Chemtronics CircuitWorks® Rosin Flux Dispensing Pen CW8200 - Manual

PRODUCT DESCRIPTION
CircuitWorks

Flux Dispensing Pens are designed
specifically to apply each type of flux with precision
control. The Rosin Flux Dispensing Pen quickly
applies a noncorrosive type R flux. This flux meets
MIL-F-14256 E and F. The No Clean Flux
Dispensing Pen precisely applies a patented
noncorrosive, halide free, organic low solid no clean
flux. This flux meets Bellcore TR-NWT-000078 and
IPC SF-818 for surface insulation resistance.

Marker pen dispenser provides controlled
and exact application

Minimize excess flux waste

Completely portable package

All fluxes are noncorrosive and halide free

Excellent material compatibility

Fast drying
TYPICAL APPLICATIONS
CircuitWorks

Flux Dispensing Pens precisely
dispense flux on:
 Printed Circuit Boards
 Chip Carriers
 Heat Sinks
 Surface Mount Device Pads
 Switches
 Sockets
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Rosin Flux Dispensing Pen
Flux Type Rosin, Grade WW
ANSI/IPC J-STD-004, Type ROL0
Flash Point (TCC) 54
°F (12 °C)
Vapor Density (air=1) > 1
Appearance Yellow Liquid
Odor Alcohol
No Clean Flux Dispensing Pen
Flux Type Rosin, Grade WW
ANSI/IPC J-STD-004, Type ROL0
Flash Point (TCC) 54
°F (12 °C)
Vapor Density (air=1) > 1
Appearance Slightly Yellow Liquid
Odor Alcohol
Shelf life 5 years
RoHS Compliant
COMPATIBILITY
CircuitWorks

Flux Dispensing Pens are generally
compatible with most materials used in the electronics
industry. As with any cleaning agent, material
compatibility should be determined on a non-critical
area prior to use.
USAGE INSTRUCTIONS
For industrial use only.
CHEMTRONICS
Technical Data Sheet
CircuitWorks

Flux Dispensing Pens
TDS # CW8000