Chemtronics CircuitWorks® No Clean Flux Dispensing Pen CW8100 - Manual (Page 2)

Circuitworks® No Clean Flux Dispensing Pen - CW8100
2. Hazards identification
See toxicological information (Section 11)
Medical conditions
aggravated by over-
exposure Repeated or prolonged contact with the mixture may cause removal of natural fat from
the skin, resulting in non-allergic contact dermatitis and absorption through the skin.
Pre-existing disorders involving any target organs mentioned in this MSDS as being at
risk may be aggravated by over-exposure to this product. :
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Ingestion : Adverse symptoms may include the following:
nausea or vomiting
stomach pains
Skin : Adverse symptoms may include the following:
irritation
redness
May cause allergic reactions in certain individuals.
Eyes : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : Adverse symptoms may include the following:
respiratory tract irritation
drowsiness/fatigue
headache
May cause sensitization by inhalation.
Target organs : Contains material which causes damage to the following organs: eye, lens or cornea.
Contains material which may cause damage to the following organs: blood, kidneys,
lungs, the nervous system, liver, mucous membranes, spleen, peripheral nervous
system, upper respiratory tract, skin, central nervous system (CNS).
Isopropyl alcohol 67-63-0 50 - 80
adipic acid 124-04-9 1 - 5
dimethyl glutarate 1119-40-0 1 - 5
3. Composition/information on ingredients
Name CAS number %
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention immediately.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
4. First aid measures
Eye contact
Skin contact
Inhalation
:
:
:
2/10 3112 5/21/2013.