Chemtronics CircuitWorks Overcoat Pen (Black) CW3300 - Manual (Page 6)

CircuitWorks® Overcoat Pen
79 - 140 C
Liquid.
75% (v/v)
0.9
>1 [Air = 1]
78 mm Hg (at 20°C)
Characteristic.
Green (G), Blue (B) or Colorless (C)
Boiling/condensation point
>1 (butyl acetate = 1)
9. Physical and chemical properties
Physical state
Relative density
Vapor pressure
Vapor density
Volatility
Evaporation rate
Odor
Color
:
:
:
:
:
:
:
:
:
Flash point : CLOSED CUP: -1°C (30°F). (Tagliabue.)
Flammable limits : Lower: 1.7%
Upper: 11%
The product is stable.
Reactive or incompatible with the following materials:
oxidizing materials Alkaline. alkalis amines acids
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
10. Stability and reactivity
Chemical stability
Conditions to avoid
Incompatible materials
Hazardous decomposition
products
:
:
:
:
Possibility of hazardous
reactions : Under normal conditions of storage and use, hazardous reactions will not occur.
11. Toxicological information
Acute toxicity
2-methoxy-1-methylethyl
acetate LD50 Dermal Rabbit >5 g/kg -
LD50 Oral Rat 8532 mg/kg -
propyl acetate LD50 Oral Rat 9370 mg/kg -
butanone LD50 Dermal Rabbit 6480 mg/kg -
LD50 Oral Rat 2737 mg/kg -
Product/ingredient name Result Species Dose Exposure
Conclusion/Summary : Not available.
Chronic toxicity
Conclusion/Summary : Not available.
Irritation/Corrosion
Product/ingredient name Result Score Exposure Observation
Conclusion/Summary : Not available.
Sensitizer
Species
propyl acetate Eyes - Mild irritant Rabbit - 24 hours 500
milligrams -
Skin - Mild irritant Rabbit - 500
milligrams -
butanone Skin - Mild irritant Rabbit - 24 hours 14
milligrams -
Skin - Moderate irritant Rabbit - 24 hours 500
milligrams -
6/11 4004 8/1/2013.