Hazards identification, Composition/information on ingredients, First aid measures – Chemtronics CircuitWorks® Silicone Free Heat Sink Grease CW7270 User Manual
Page 2: Fire-fighting measures

CircuitWorks® Silicone Free Heat Sink Grease
2. Hazards identification
See toxicological information (Section 11)
Medical conditions
aggravated by over-
exposure
Pre-existing disorders involving any target organs mentioned in this MSDS as being at
risk may be aggravated by over-exposure to this product.
:
Ingestion
:
Adverse symptoms may include the following:
Irritating to mouth, throat and stomach.
nausea or vomiting
diarrhea
Skin
:
Adverse symptoms may include the following:
irritation
redness
Eyes
:
Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation
:
No specific data.
zinc oxide
1314-13-2
70 - 85
Silica, amorphous, fumed, cryst.-free
112945-52-5
1 - 5
3. Composition/information on ingredients
Name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Wash out mouth with water. Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person. Get medical
attention immediately.
Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash clothing before reuse. Clean
shoes thoroughly before reuse. Get medical attention immediately.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion
No specific treatment. Treat symptomatically. Contact poison treatment specialist
immediately if large quantities have been ingested or inhaled.
Notes to physician
:
:
:
:
:
Protection of first-aiders
:
No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Use an extinguishing agent suitable for the surrounding fire.
5. Fire-fighting measures
Extinguishing media
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
No specific fire or explosion hazard.
Special exposure hazards
:
None known.
Suitable
:
Not suitable
:
Flammability of the product
:
2/9
7270
10/22/2013.