Usage instructions, Availability, Technical & application assistance – Chemtronics Electro-Wash MX Pen FW2150BLK User Manual

Page 2: Safety & environmental data

Advertising
background image


Material


Compatibility

ABS

Excellent

Buna-N

Excellent

EPDM

Excellent

Graphite

Excellent

HDPE

Excellent

Kynar

Excellent

LDPE

Excellent

Lexan

Excellent

Neoprene

Excellent

Noryl

Excellent

Nylon 66

Excellent

Cross-Linked PE

Excellent

Polypropylene

Excellent

Polystyrene

Excellent

PVC

Excellent

Silicone Rubber

Excellent

Teflon

Excellent

Viton

Excellent


USAGE INSTRUCTIONS

Read MSDS carefully prior to use.

1. Hold pen vertically and depress tip. Rub pen on
surface to be cleaned.
2. When using with a QbE® Cleaning System, pull one
QbE® wipe over the Fiber-Safe foam platen and depress
the pen tip onto the wipe to start liquid flow.
3. Apply a small amount (1" diameter) of Electro-
Wash® MX onto the wipe. Follow the Combination
Cleaning process (CCp™) as follows:

• Hold the end-face at 90º perpendicular to the
QbE® platen; allow the end-face to glide over
wipe. Remember to adjust for APC connections
• Draw the end-face lightly over the platen in a
smooth linear motion • Do not press too hard
• Do not retrace your cleaning procedure in the
same area • Do not use a figure-eight motion; do
not use a "twist & turn" motion • Check your
work with a fiber scope or measuring device

AVAILABILITY

FW2150

11g (0.39 oz.) Pen

FW2150BLK Box of 24 pens without blister card




TECHNICAL & APPLICATION
ASSISTANCE

Chemtronics provides a technical hotline to answer
your technical and application related questions.
The toll free number is: 1-800-TECH-401.

www.chemtronics.com

[email protected]

SAFETY & ENVIRONMENTAL DATA

SAFETY & ENVIRONMENTAL DATA

CFC

0.0%

VOC

100%

HCFC-225

0.0%

HFC

0.0%

HCFC-141b

0.0%

nPB

0.0%

CFC, HCFC-225, HCFC-141b, VOC, HFC, and
nPB percentages shown are the content by weight.


NOTE:

This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly. CHEMTRONICS
does not guarantee the accuracy of the data and assumes

no liability in connection with damages incurred while
using it.

Chemtronics®, Electro-Wash®, and QbE® are registered trademarks of
Chemtronics. All rights reserved. CCp™ and Controlwipes™ are trademarks
of Chemtronics. All rights reserved.
All other trademarks herein are trademarks or registered trademarks
of their respective owners.

CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888

REV. A (08/13)

DISTRIBUTED BY:





Advertising
This manual is related to the following products: