Chemtronics Electro-Wash MX Pen FW2150BLK - Manual (Page 10)

Electro-Wash® MX Pen
15. Regulatory information
The following components are listed: ETHYL ALCOHOL; ISOPROPYL ALCOHOL;
ETHYL ACETATE Massachusetts
Australia inventory (AICS): All components are listed or exempted.
China inventory (IECSC): All components are listed or exempted.
Japan inventory: Not determined.
Korea inventory: All components are listed or exempted.
Malaysia Inventory (EHS Register): All components are listed or exempted.
New Zealand Inventory of Chemicals (NZIoC): All components are listed or exempted.
Philippines inventory (PICCS): All components are listed or exempted.
Taiwan inventory (CSNN): Not determined.
International regulations
International lists :
:
Product name CAS number %
SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall
include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.
Isopropyl alcohol 67-63-0 1 - 20
Isopropyl alcohol 67-63-0 1 - 20
Form R - Reporting
requirements
Supplier notification
Canada inventory : All components are listed or exempted.
Chemical Weapons
Convention List Schedule
I Chemicals : Not listed
Chemical Weapons
Convention List Schedule
II Chemicals : Not listed
Chemical Weapons
Convention List Schedule
III Chemicals : Not listed
New York : The following components are listed: Ethyl acetate
New Jersey : The following components are listed: ETHYL ALCOHOL; ALCOHOL; ISOPROPYL
ALCOHOL; 2-PROPANOL; ETHYL ACETATE; ACETIC ACID, ETHYL ESTER
Pennsylvania : The following components are listed: DENATURED ALCOHOL; 2-PROPANOL;
ACETIC ACID ETHYL ESTER
State regulations
16. Other information
Hazardous Material
Information System (U.S.A.)
1
3
1
Health
Flammability
Physical hazards
FLAMMABLE LIQUID AND VAPOR. CAUSES EYE IRRITATION. MAY CAUSE SKIN
IRRITATION. CONTAINS MATERIAL THAT CAN CAUSE TARGET ORGAN DAMAGE.
CANCER HAZARD - CONTAINS MATERIAL WHICH CAN CAUSE CANCER. Label requirements :
:
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
10/11 0219FW 5/2/2014.